Sub Cables / Jumper Cables

The low resistance water Cooled Kickless Cable described here as a special flexible Cable for use in the secondary circuit of a Resistance Transformer connected to a spot welding gun.

The low resistance water Cooled Kickless Cable described here as a special flexible Cable for use in the secondary circuit of a Resistance Transformer connected to a spot welding gun.

This cable comprises of six conductor ropes with a special standing (Herringbone construction) and insulted from each other by neoprene / EPDM Rubber extrusion are arranged in alternate polarity relationship and braided in to a single hose.

180 Sqmm

200 Sqmm

Length (mm)

D.C Resistance at 30o

Length (mm)

D.C Resistance at 30o

600

80µΩ

600

70µΩ

700

90µΩ

700

85µΩ

800

105µΩ

800

95µΩ

900

115µΩ

900

110µΩ

1000

130µΩ

1000

120µΩ

1200

155µΩ

1200

145µΩ

1500

195µΩ

1500

180µΩ

Sub Cable Selection
180 SQMM : 50 – 100 KVA / 9000-12000 AMPHERES
200 SQMM : 75 – 125 KVA / 10000-13500 AMPHERES
220 MCM : 100 – 150 KVA / 12000-15000 AMPHERES
240 MCM : 150 – 200 KVA / 15000-18000 AMPHERES

DO’S & DON’TS

  1. WATER SUPPLY SHOULD BE MAINTAINED AT 50 -60 PSI
  2. CHECK WHETHER THE TERMINALS ARE TIGHTENED AT THE TRANSFORMER END AND GUN END TO AVOID SPARKING
  3. DON’T USE A UNDER POWERED CABLE
  4. TRY TO MAINTAIN DRAWINGS
  5. INSTALLATION SHOULD BE PROPER TO AVOID STRAIN ON CABLE FOR LONGER LIFE
Contact Us